Stampin’ Up! Ornate Garden Suite

Posted on by
2

Today’s cards feature the Ornate Garden Specialty DSP and Ornate Layer Dies. You know this Ornate Garden Suite is available for a limited time, right? Not to scare you, what that means is it is an early release product premier showing of specialty items available for a short time, then it will be in the new 2020-21 Annual Catalogue. This premier gives you the wonderful opportunity to play with the product early. Here are the cards…

Ornate Garden Specialty DSP / Ornate Layers Dies card #1

 

 

Ornate Garden Specialty DSP / Ornate Layers Dies card #2

 

 

 

 

 

 

 

 

Card #1 shows one of the papers and card #2 shows the other side of the same paper, both quite elegant.

Details: Card #1…

  • Whisper White Notecard & envelope
  • Ornate Garden SDSP 3 1/2″ x 5″ + scrap approx 1/2″ x 3 1/2″
  • Vellum 3 3/8″ x 4 7/8″
  • So Saffron 2 1/4″ x 3 1/2″ + scrap 3/4″ x 3 1/2″
  • Whisper White 1 1/2″ x 2 3/4″
  • Stazon Saddle Brown
  • Gilded Gems
  • Ornate Thanks stamp set
  • Ornate Style stamp set
  • Stitched Rectangles Dies

How to…

  • Adhere the SDSP to the notecard using liquid glue
  • Adhere the vellum to the notecard using liquid glue but just in the center… TIP: Any type of glue shows through on vellum. In this case the die cut will cover the center of the vellum so it won’t matter.
  • With the So Saffron and the Ornate Layers Dies, cut your piece. Adhere with liquid glue directly to the vellum
  • With the Whisper White and the Stitched Rectangles Dies, cut your piece. Stamp your sentiment with Stazon Saddle Brown ink using sentiments from Ornate Thanks. Adhere one Gilded Gem. Adhere to the So Saffron die cut with dimensionals

The inside…

Inside card #1

  • Adhere the SDSP scrap to the So Saffron scrap.
  • Stamp your sentiment from Ornate Thanks stamp set in Stazon Saddle Brown ink

The envelope…

  • Using So Saffron ink, stamp the pretty floral design from Ornate Style stamp set, both on the front and on the envelope flap. DONE!

    Ornate Style stamp set card #1

 

 

 

 

 

 

 

 

Details – Card #2

Ornate Garden Specialty DSP / Ornate Layers Dies card #2

  • Whisper White Notecard and envelope
  • Melon Mambo 3 3/8″ x 4 7/8″ (cut 2, one is for the the inside)
  • Ornate Garden Specialty DSP 3 1/4″ x 4 3/4″
  • Whisper White 1 1/2″ x 2 3/4″, 3 1/4″ x 4 3/4″ for the inside
  • Black Memento ink
  • Shimmer Ribbon
  • Ornate Thanks stamp set
  • Ornate Style stamp set

How to…

  • Adhere the Melon Mambo directly to the Notecard with liquid glue.
  • Adhere the SDSP directly to the melon Mambo with liquid glue
  • Using the Ornate Layers Dies, cut your piece from Melon Mambo
  • Using the Stitched Layers Dies, cut your piece from Whisper White. Stamp your sentiment from Ornate Thanks stamp set in Memento Black ink. Adhere with liquid glue to the Melon Mambo die cut.
  • Adhere the combined Melon Mambo & Whisper White to the card front with dimensionals.
  • Using your Shimmer Ribbon 1/4″, tie a bow and adhere with a glue dot. Your front is done!

The inside…

Ornate Thanks stamp set card #2

  • Stamp your sentiment from the Ornate Thanks stamp set in Memento black ink
  • Stamp the sweet flower from the Ornate Style stamp set in Memento black ink. Color with Stampin’ Blends Lovely Lipstick and Light Old Olive.  Adhere to the Merlon Mambo.
  • Adhere the combined Melon Mambo and the
    Whisper White to the card inside. Your card is done!

 

The envelope… OOPS, I didn’t take a picture of it…

  • Stamp the same flower from the Ornate Style stamp set in Memento Black ink in the lower front corner. I did not color it.
  • With that same flower and same ink, stamp all over the envelope flap.

What a fun set of cards – same layout, same SDSP but reversed, same die cuts, yet each is unique and wonderful. These are going out to a couple of friends today in hopes of brightening their days of disciplined isolation… May you all remain safe and well during these quarantined times. Special hugs….

Thanks for stopping b y. May you have a beautiful day.

Make someone happy by sending them a handmade card.

Ornate Garden Specialty DSP / Ornate Layers Dies card #1

Ornate Garden Specialty DSP / Ornate Layers Dies card #2

Stampin’ Up! Ornate Garden Suite

Posted on by
1

Today’s post is meant to tease you about the Stampin’ Up! Ornate Garden Suite available today, April 1. This is no joke!!! It’s available for the month and then will be available for purchase again when the new Annual Catalogue 2020-21 goes live (Jun 2). In other words – special deal.

Here are a couple of cards I posted recently using this suite of products and a couple of “teaser” pictures of cards to come.

Ornate Garden Suite #1

Ornate Garden Suite #2, inside

Ornate Garden Suite #2

 

 

 

 

 

 

 

 

Ornate Garden Suite teaser #2

Ornate Garden Suite teaser #1

 

 

 

 

 

 

 

 

 

Ornate Garden Suite #3

Ornate Garden Suite

Shop with me? Love it if you would… Please us my new HOST CODE ZUPR7SAY if your purchase is between $50-$150 to receive a free item of your choice worth $10.

Make someone happy by sending them a handmade card.

May you have a beautiful day

Thanks for stopping by!

Stampin’ Up! Peaceful Poppies Peek – a -boo Card

Posted on by
2

Today’s card features the Stampin’ Up! Peaceful Poppies DSP and several coordinating products: Peaceful Poppies Elements, Poppy Moments Dies, the Peaceful Moments stamp set AND the Painted Poppies stamp set – all in one card! So fun… here it is…

Peaceful Poppies Peek-a-boo Card

And here’s how to make it…

  • Whisper White Thick card stock for the card base 4 1/4″ x 11″ scored at 5 1/2″
  • Peaceful Poppies DSP 4″ x 5 1/4″. Adhere to the card front with liquid glue.
  • Using the second largest circle in the Layering Circles Dies, cut a circle about 3/4″ from the top and centered right to left.
  • Cut another circle out of coordinating Peaceful Poppies DSP using the same circle die.
  • Using the largest Stitched Shapes Dies circle, cut a circle from Rich Razzleberry.
  • Adhere the coordinating DSP circle to the Rich Razzleberry circle with dimensionals.
  • Place the circle on the inside without glue. Locate the correct placement for this circle set by closing the card front over it, carefully lifting the card front while still holding the double circle in place. Make very small pencil marks on the outside of the double circle to use as a guideline for adhering. Attach this to the card inside with liquid glue. Erase pencil marks if they show.

That was the hard part! Now the rest is easy… Back to the card front…

  • With your Peaceful Poppies Elements at hand, remove the double poppy and three leaves from the vellum. I arranged these as desired and felt something more was needed.
  • Diecut the leaves from vellum using the Poppy Moments Dies
  • The double poppy elements were put on dimensionals, but before adhering, the vellum leaves were adhered with glue dots,. making certain those glue dots would be covered by the double poppy element. Attach the double poppy.
  • Stamp your sentiment using the Painted Poppies stamp set with Memento Black ink.

The inside…

Peaceful Poppies DFSP with Well Said stamp set

  • Because the circle is already in place, all you need is your sentiment. I found these two from the Well Said stamp set, stamped in Memento Black ink.

The envelope…

  • Using liquid glue, adhere a 2 1/4″ x 6″ strip of the coordinating DSP to the envelope flap and trim.
  • On the card front, stamp the leaves from the Painted Poppies stamp set with Memento Black ink.
  • Color the leaves with Old Olive marker and the stem with Granny Apple Green marker. TIP… when coloring anything, leave a bit of white showing. It gives the leaf (or whatever the stamp is) a bit of reality and depth.

Your card is complete and ready to send… this one is going to a fellow stamper who has just achieved a goal. Hope she likes it!

Peaceful Poppies #2

Peaceful Poppies Peek-a-boo Card

 

 

 

 

 

 

 

 

Thanks for stopping by today.

May you have a beautiful day!

Maker someone happy by sending them a handmade card.

Please use my CURRENT HOST CODE WHEN SHOPPING WITH ME… XYW2SYNV. Sale-a-bration ends today, March 31. I’ll be back later with more info about that.

Stampin’ Up! So Very Vellum Pocket Card

Posted on by
4

Today’s card is made with a FREE product during Sale=a=bration and that is Stampin’ Up! So Very Vellum. I haven’t made a pocket card before and it was surprisingly easy. I kept the inside very simple. Let’s take a look…

So Very Vellum & Happy Birthday To You plus Thoughtful Blooms

It’s interesting how the process happens when making a card. I started out with one idea and went totally another! I knew I wanted to make a pocket card and I knew I wanted to use vellum e as the pocket. And the So Very Vellum with its embossed pattern seemed perfect. Here’s how the vellum looked before putting it together.

So Very Vellum pocket card prep

  • So Very Vellum 8″ x 5 1/2″ Funny thing is, I started with a piece cut to 8 1/2″ but was using the paper trimmer to score it and scored too hard and tore the paper.😔 First lesson… So I moved to the scoring tool and was much more gentle and it worked perfectly.
  • Score on the long side 1/2″ and trim. See the photo for how to trim.
  • Score on the short side 1/2″ and again at 3 3/4″. Trim the 1/2″ side
  • Add tear n tape to the 1/2″ edges – see photo. Remove the short side of tape and close, then do the same with the bottom, as it goes on the outside. This becomes the BACK of the pocket!
  • Decorate as desired… Because I was thinking of doing something else, I began by stamping four partials of the Happy Birthday To You cake on Shimmer paper.

Happy Birthday To You
cake partials

Happy Birthday To You cake partials colored with Stampin’ Blends

 

 

 

 

 

 

You can see that I colored each of the flowers on the cakes using different shades of yellows and greens. It was fun to see the contrasts side by side. Then I cut them all out using the Birthday Dies. By this time I had changed my direction for completing this particular card, but am ready with the extra pieces for another project – yay! If you are looking at the photo of the colored florals, I chose #3 to decorate the pocket.

  • I colored the flowers on #3 with Dark Daffodil Delight and Light So Saffron Stampin’ Blends, the leaves with Dark Soft Sea Foam Blends. I used the Color Lifter in places to highlight areas.
  • Using the Birthday Dies again, I cut out leaves twice and the berries also twice. The leaves are cut from Garden Green and the berries from Shimmer paper.
  • These leaves and berries were adhered to the back of the floral diecut using glue dots, but you could swipe snail on the back and use that just as well. I then attached dimensionals over several areas of the back further holding these small pieces in place.
  • The floral section was adhered to a Whisper White circle diecut with the Layering Circles Dies.
  • The circle also got dimensionals and was adhered to the vellum pocket.

Now to the inside…

Thoughtful Blooms pocket card insert

  • Cut mint macaron 3 1/2″ x 5 1/2″
  • Cut Soft Sea Foam 3 3/8″ x 5 3/8″
  • Stamp the Thoughtful Blooms leaf spray with Garden Green ink
  • Stamp the flower with Daffodil Delight and punch out with the Small Bloom Punch
  • Stamp additional small flowers using both Daffodil Delight and So Saffron for a nice contrast.
  • Adhere the punched flower to the center of the leaf spray using one dimensional

Envelope… we never ever forget to do something with the envelope. I must say, I got a bit carried away but I like the finished product.

  • Stamp the leaf spray with Garden Green; the flowers with Daffodil Delight and So Saffron, according to your choice.

So Very Vellum & Happy Birthday To You plus Thoughtful Blooms

  • I did the same on the envelope flap, stamping three bouquets.

Your card, pocket and envelope are now complete! Isn’t it sweet? I really like how it turned out even though I had something else in mind altogether… Another day 😏

Sale-a-bration is over March 31, but you will be able to continue ordering from the Mini Catalogue until June 1 – just no freebies involved.

April 1 Stampin’ Up! is offering a Premier Ornate Gardens SuiteCatalogue, but this Premier Suite gives you the opportunity to play! How fun is that?!

Ornate Garden Suite video – available for. purchase April 1!

Ornate Garden Suite

 

 

 

 

 

 

 

 

 

Thanks for stopping by today.

May you have a beautiful day.

Make someone happy by sending them a handmade card!

 

Stampin’ Up! Watercolored Happy Birthday To You, Birthday Dies

Posted on by
2

Today’s card features the Stampin’ Up! Happy Birthday To You stamp set and matching Birthday Dies available during Sale-a-bration. This set is so versatile: birthdays, anniversaries, weddings, or using the flower, leaf and berry dies on their own to create a wreath – the ideas abound! Let’s see…

Happy Birthday To You #1

This card has such visual appeal in person… all the layers make it pop. And here’s how I did it…

  • On Shimmer Paper, stamp the cake image twice with Stazon Jet Black ink. The second image really only needs to be the flowers as that will be diecut.
  • With your aqua painter and Flirty Flamingo, color the flower petals on both stamped images. Why you ask? Because you do not want a blank image behind the flowers. 
  • With your aqua painter, color the leaves first with Mint Macaron, then darken areas with Garden Green.
  • Go ahead and color the cake stand at this point, with the rim being the darker portion. Do you remember our mothers or grandmothers green glass (also pink glass)? That’s what this cake stand reminds me.
  • Using your aqua painter color the berries with Poppy Parade. Here’s what it looks like before putting the images together.

Happy Birthday To You watercolor first, then the additional flowers.

Now it is time to diecut your various pieces.

  • Diecut the full cake first then your additional flowers.
  • While you’re at it, diecut the leaf image twice out of Garden Green.
  • Diecut the berries twice out of Shimmer paper.
  • Diecut the second largest circle from the Layering Circles framelits, out of vellum.

Layer your pieces. This is a matter of preference in placement. I used not only glue dots, but also snail and dimensionals. Some pieces went behind the vellum and some went on top of the vellum but behind the cake. Here’s how I put it together…

  • Vellum on dimensionals
  • Cake on dimensionals
  • Flowers on dimensionals

Happy Birthday To You #3

Happy Birthday To You #4

 

 

 

 

 

 

 

 

 

Paper layers:

  • Card base is Soft Sea Foam 8 1/2″ x 5 1/2″, scored at 4 1/4″
  • Mint Macaron 4 1/8″ x 5 1/4″
  • Garden Lane DSP 3 7/8″x 5″
  • Final layer is the vellum, cake and diecuts.

The inside is super simple and easy…

Happy Birthday To You, inside

  • Stamp the sentiment from Happy Birthday To You in Stazon Jet Black ink on a Whisper White 4″ x 5 1/4″.
  • With glue dots add the remainder of the berry and leaf diecuts. I put a glue dot under the berry diecut, then under two of the Garden Green leaves, tucked the stem of the leaves under the berries and covered the glue dot under the berrries.
  • Adhere the Whisper White to the card base using liquid glue.

Remember your envelope…

  • Find a coordinating piece of Garden Lane DSP 2 1/4″ x 6″, adhere to the envelope flap with liquid glue and trim.
  • Stamp the envelope front in Garden Green ink.

YAY! Your card is complete and ready to send to a favorite person. This one is going to a S-I-L whose birthday is right around the corner.

Happy Birthday To You #1

Thanks for stopping by. I hope you enjoyed today’s project and that you try your hand at watercoloring.

May you have a beautiful day.

Make someone happy by sending them a handmade card.

 

Stampin’ Up! Good Morning Magnolia

Posted on by
1

Today’s card is made with the amazing Stampin’ Up! Good Morning Magnolia stamp set from the 2019-2020 Annual Catalogue. This stamp set has additional options … first there are the two stamp sets, then matching dies and finally an embossing folder. Today we use just the one stamp set and the embossing folder. The card is elegant and depending on the sentiment used, could be for many purposes. This is a thank you card, for I’m grateful for a lot, and during this time especially it seems appropriate to give thanks. Let take a look…

And here are the details on how to make it:

  • Smokey Slate card stock 4 1/4″ x 11″
  • Night of Navy 4″ x 5 1/4″ (cut 2, one for the inside)
  • Silver Foil 4 1/8″ x5 1/8″, 2 7/8″ x 4 1/8″
  • Whisper White 3 7/9″ x 5 1/8″ (for the inside)

 

  • With your embossing buddy, rub one panel of the Night of Navy,. With Versamark ink, stamp the large flower from Good Morning Magnolia, sprinkle with silver embossing powder and heat set. Make certain all is glistening silver before setting aside to cool.

Let’s create the inside at this point and come back to the front later.

  • Adhere the second panel of Night of Navy to the inside, using liquid glue.
  • With your Whisper White cs, stamp the sentiment and leaves with Night of Navy ink. Adhere this panel to the inside Night of Navy.

Now back to the front..

  • With the Stitched Rectangles, cut the center of that magnificent magnolia.
  • Adhere the larger section of the magnolia to the larger silver foil using snail.
  • Adhere the smaller piece to the smaller Silver Foil with snail. Add dimensionals to this piece and adhere to the larger magnolia, matching all of the floral design.
  • TIP…Adhering  to foil with liquid glue is slippery and the paper often moves. I strongly encourage using snail or dimensionals when adhering to foil papers.

The envelope…

  • Cut a piece of Night of Navy 2 1/4″ x 6″, spritz with water to soften the paper fibers and run through the Magnolia Lane 3D embossing folder.
  • Adhere to the envelope flap with liquid glue and trim.
  • Stamp the leaf in the lower left corner of the envelope front with Night of Navy ink. (I might have taken my picture a bit early and didn’t capture this, but I did do it!)

Good Morning Magnolia

Good Morning Magnolia inside

Thanks for stopping by today. Please use my CURRENT HOST CODE XYW2SYNV when shopping with me. With a $50 purchase you will receive an item of your choice of $10 value. If your purchase is over $150, please do not use my host code, as Stampin’ Up! will offer you free product. Just remember, you will still get that free product from me! One item per customer/ month, thank you.

Sale-a-bration is quickly coming to an end – March 31. It’s during this time you receive free product from SU! for every $50 purchase.

May you have a beautiful day.

Make someone happy by sending them a handmade card!

 

Stampin’ Up! Good Morning Magnolia

Posted on by
2

Today’s card uses the Stampin’ Up! Good Morning Magnolia stamp set, heat embossing and sponge daubers. I’ve created this as a birthday card, but it could so easily be sympathy, wedding, anniversary, or just a note. It is soft and it is feminine. Let’s look….

Good Morning Magnolia #1

Here are the details:

  • Thick Whisper White card stock 8 1/2″ x 5 1/2″, scored at 4 1/4″, another piece 4 1/8″ x 5 3/8″ for the card front.
  • Rub the smaller cs with your embossing buddy, making certain to cover the entire area.
  • Using Versamark ink, stamp the Good Morning Magnolia stamp on the right hand corner, stamping as much of the magnolia as you desire. Ink a portion of the stamp again and stamp in the upper left corner.
  • Sprinkle with white embossing powder and heat emboss. Set aside to cool.
  • On a scrap, of vellum, rub with your embossing buddy and with Versamark ink stamp the flower bud. Sprinkle with white embossing powder then heat emboss until all the powder has melted. Set aside to cool. Once cool, use the Magnolia Memory Dies to cut out the flower bud.
  • On another scrap of vellum approximately 1/2″ x 3″, rub with the embossing buddy, ink your sentiment and stamp. Sprinkle with the white embossing powder and heat emboss until all powder has melted. Set aside to cool.
  • Using Blushing Bride and sponge daubers, lightly rub the color exactly where you want it. I made it darker in the center and lighter toward the outside. For the leaves, do exactly the same with Old Olive ink. Do the same on the vellum flower bud but color on the backside of the vellum.
  • Attach the flower bud with a mini dimensional at the base of the bud.
  • Attach the vellum sentiment in the same spot using a glue dot. I used a second glue dot, placing it just under the word happy, so it wouldn’t show through.
  • Now you are ready to adhere this directly to your card base, using liquid glue or snail.

For the inside… I’ve kept this very simple.

Timeless Tulips sentiment – inside

  • Choose your sentiment… this is from the Timeless Tulip stamp set (available during Sale-a-bration), and using Stazon Jet Black ink..

Thanks for stopping by today. 

May you have a beautiful day.

Make someone happy by sending them a handmade card.

Good Morning Magnolia #2

 

Stampin’ Up! Best Dressed 6 x 6 DSP w/Painted Labels Dies

Posted on by
2

Today’s cards feature the Stampin’ Up! Best Dressed 6×6 Designer Series Paper and the Painted Labels Dies. The focus points right to this fun DSP. This would be an easy card to mass produce, which really isn’t my thing, but it could be done. Let’s take a look…

Best Dressed card #1

 

Best Dressed Card #T

 

 

 

 

 

 

 

These are so fresh and bright! I’ve put no sentiment that designates whether this is birthday or get well or hello to a special someone. That can be added right before sending. But this card as is… well it’s just plain cute! Here are the deets:

For the card front…

  • Thick Whisper White for the card base, 8 1/2″ x 5 1/2″, scored at 4 1/4″
  • Old Olive 4″ x 5 1/4″ (cut 2, one for the inside)
  • Best Dressed 6 x 6 Designer Series paper 3 7/8″ x 5 1/8″ + coordinating sing the scrap about 3 1/4″ square
  • Whisper White for the diecuts about 3 1/4″ square

Best Dressed card #1 A

How to put it together…

  • adhere the DSP to the Old Olive using liquid glue or snail
  • Put on dimensionals and adhere to the card base.
  • Using the coordinating scrap, cut a circle using the largest circle die from the Circle Dies
  • Using the Whisper White 3 1/4″ scrap, cut the wonderful open circle from the Painted Labels Dies.
  • Stamp your sentiment using Old Olive ink. This sentiment comes from the Under My Umbrella stamp set.
  • Adhere this stamped piece to the circle using liquid glue or snail. Put on dimensionals and adhere to the front, noting placement for each card.

Notes…

  • Card #1: Stamp three flowers from the … blooms stamp set and punch out using the Small Bloom Punch. Embellish with Noble Peacock Rhinestones. Put two of these of dimensionals and place accordingly. The other gets adhered using liquid glue and tucked under one of the flowers.
  • This card also got a fun ribbon… Granny Apple Green 1/2″ Textured Weave Ribbon. Adhere with a glue dot.
  • Card #2: A couple of differences on this card. First..I used a scrap of Whisper White 5/8″ Ribbon scrap to put behind the circles, adhering it with a bit of snail directly onto the ribbon.
  • Second…since the Painted Labels diecut was used on the DSP, use another Whisper White scrap to cut a circle that will be large enough for your sentiment but small enough to show off a bit of the DSP. Adhere that circle (after stamping of course) with liquid glue to the DSP cut. Embellish with Glitter Enamel Dots to coordinate with the card front. Adhere with dimensionals over the ribbon.

The insides:

Best Dressed card 1 inside

  • Best Dressed card #2 inside

  • Adhere the additional piece of Old Olive to the inside.
  • Adhere a 1/2″ strip to the lower potion of the card (about 1/4″ from the bottom.
  • For card #1 I added an additional flower cut by using the Small Bloom Punch. It also got a Noble Peacock Rhinestone. Do you notice the variegation in the color of paper? I used my Old Olive light and dark Blends to color a section of Whisper White card Stock and simply punched out the flower. :O)

Remember to do your envelopes! Note that Card #1 flap has an additional 1/4″ piece of Old Olive in addition to the DSP. Card #2 is just the DSP.

Below are two more cards I created in the same way, just using different papers in the stack and coordinating the card stock to match.

  • Card #3 uses Mint Macaron card stock, Mint Macaron  1/4″ Ribbon and the Glitter Enamel Dots
  • Card #4 uses Purple Posy card stock, Polka Dot Tulle 5/8″ Ribbon and Glitter enamel Dots. TIP: The Polka Dot Tulle ties beautifully but for me, is difficult to make a bow. How did I fix that? I tied it as a bow then trimmed the the bow part so it looks like just two ribbon pieces together. 

Best Dressed card #3

Best Dressed card # 3 inside

 

 

 

 

 

 

 

 

Best Dressed card #4

Best Dressed card #4 inside

These were such fun cards to do – and I like how they all turned out so differently.

These are the final days of Sale-a bration … March 31 ends the promotion of free product with purchases of $50, $100 from Stampin’ Up!. The amount you purchase determines those items that may be chosen as a free product!  How great is that! AND Stampin’ Up! has just released it’s THIRD PRODUCT RELEASE of possible free items. Click on the flyer for more information.

03.24.20_FLYER_SAB_3RD_RELEASE_US

 

Thanks for Stopping by today. Please remember to use my CURRENT HOST CODE XYW2SYNV when shopping with me. With every purchase of $50 – $150, you will receive an item of your choice worth up to $10, from me!  So two bonuses for shopping right now. :O)

May you have a beautiful day.

Make someone happy by sending them a handmade card.

Stampin’ Up! Flowering Foils Gift Set

Posted on by
2

Today’s project features the incredible Flowering Foils Specialty DSP that is a free Sale-a bration item when purchasing $50 worth of product, and some of our alcohol Stampin’ Up! Blends. Let’s take a look…

Coloring on this paper is so relaxing – really a cathartic for me – not that I’m stressed or anything. It simply just really get’s me going… I took one sheet of the foils and broadly cut out all the flowers. Then I sorted them putting them is piles of like flowers. That’s when I could start the coloring process, and I colored maybe four of them, then began trimming, so I could raise up some of the petals. The card has three layers on top of the card base. Here’s more detail…

  • Thick Whisper White for the card base 4 1/4″ x 11″, scored at 5 1/2″; 3 5/8″ x 5 1/8″ for the inside
  • Lovely Lipstick 4 1/8″ x 5 3/8″ – cut 2, one is for the inside
  • Flowering Foils SDSP 3 7/8″ x 5 1/8″ for the front; 1/8″ x 5 1/8″ for the inside.

 

  • Color the flower using Light and Dark Lovely Lipstick Stampin’ Up! Blends. Begin with the dark, coloring only one or two petals, then going back with the light to fill in. Complete the flower then go back and use the Color Lifter Blend to lighten areas that you think need it. This is where it really begins to look almost real 🙂 Curl the edges of the. petals using a bone folder.
  • Next do the leaves in Light and Dark Old Olive Stampin’ Up! Blends. I didn’t use much color lifter on these, but did some.
  • Finally I colored the flower buds with the same Lovely Lipstick combination of blends.
  • Now do the trimming and layering process to your satisfaction. I colored some of those flowers that were on edges of the paper so they became the top layers of the flowers. Adhere the layers with dimensionals so it truly becomes a three dimensional project. The top flower needs the center colored and I used Light and Dark Daffodil Delight Blends for that. Keep curling the edges of the flower petals to get that “real” look.
  • I finally added Wink of Stella on the top couple of layers. I like the sparkle!
  • Add the bow: Silver Metallic Edge Ribbon and adhere with a glue dot.

The inside…,

  • Super simple: adhere the additional Whisper White panel to the extra Lovely Lipstick.
  • Add the colored 1/8″ strip of the SDSP to the left of the Whisper White.
  • Adhere the Lovely Lipstick to the inside… Card is complete!

The gift bag follows the exact instruction from Sunn Stampin’ – I encourage you to watch her video on this. I simply used a different Flowering Foils SDSP to create the bag, then I decorated it.

 

  • Lovely Lipstick 2 1/2″ x 11 1/2″, gently creased around the finished bag, then score those creases, adhere tear n’ tape to the ends and wrap around and attach to the bag.
  • The flower was a double flower from the SDSP and I colored it the same as above. Then I used another layer on the bottom flower, trimming the petals apart a bit while still keeping them intact.
  • The lower flower has a Perennial Essence Floral Centers for the inner portion. I considered using another for the upper flower, but it was too much. Curl the edges of the petals using your bone folder, but be very gentle – you don’t want to pull the petals off.
  • Adhere a Silver Metallic Edge Ribbon and bingo -done.

Thanks for making a second stop with me today. Do tell me what you think of these projects. I had such fun coloring and putting together. 😏

May you have a beautiful day.

Make someone happy by sending them a handmade card.

 

Stampin’ Up! Third Release for Sale-a-bration

Posted on by
Reply

Stampin’ Up! is doing amazing things… and to inspire us all they have a THIRD RELEASE for the final days of Sale-a-bration (SAB). Products available in the first and second releases may still be ordered, but this Third Release is a stimulation for all of us. When you order from this THIRD RELEASE you must use the item number shown on the flyer below as they are a different item number strictly for this final sale. Please see the flyer for more details – then place your order with me!

03.24.20_FLYER_SAB_3RD_RELEASE_US

 

I’ll be back later today with a really fun project using the

Flowering Foils Specialty DSP

that is also a free product during SAB. 

For now – continue crafting… what else are you going to do during the time of “self containment”? Who really wants to clean out the garage, the attic or a closet? Well, not me! But I will say that yesterday hubby and I began tackling the garage, for that is our storage area for all things. Yes, we get our cars in the garage… but it’s cramped and a bit scary. So that’s been rather a freeing project if I do say so myself. I have some items to shred, but thank goodness our sanitation workers are still on the job and our recycling goes out today. Lots of old papers that don’t need keeping any more are part of that pickup.

See you soon with all the details of my project and a fun gift set!