Search

Terry Lynn Bright, Stampin' Up! Demonstrator

Creative Inspiration

Tag

Beautiful Autumn Bundle

Stampin’ Up Beautiful Autumn Bundle – yet again!

Today’s card is another focus of the Gilded Autumn Specialty DSP and the Beautiful Autumn Bundle. I can’t seem to get enough of these two! Here the card…

Beautiful Autumn Bundle again – #1

Isn’t this paper stunning? First of all, those little leaves are punched out of one of the Specialty papers in this pack – using what else? the Autumn Punch Pack! The background leaf – or cream colored one is from the Love of Leaves Bundle and is a leftover from a card a couple of days ago :O) I’m getting ahead of myself again. Let’s break down the details of the how…

  • Punch out several leavers & acorns from one of the Gilded Autumn Specialty DSP – using the Autumn Punch Pack. I wanted to make a wreath again and decided to use the Gold Hoop Embellishment as my base, but felt the leaves needed something else to ‘sit’ on. Since I had this leaf already lying on my table (Love of Leaves Bundle), that became the real foundation.
  • Layer leaves on a foundation – the leaf as mentioned above. Adhere each with liquid glue, curling the leaves just a bit before attaching. Add an acorn or two as well.
  • Tie a bow using the wonderful Terracotta Tile from the Ornate Garden Ribbon Combo Pack. Adhere with a glue dot.
  • With a length of the Copper from the Metallic Ribbon Combo Pack, add this adorable Acorn Trinket and tie directly to the Gold Hoop Elmbellishment forming a knot.
  • Attach the wreath with glue dots to a 3″ square of the Gilded Autumn Specialty DSP.
  • Adhere the DSP panel to a nearly 3 1/4″ square of Copper from the Brushed Metallic Papers – using Stampin Plus
  • Adhere these two papers to a 3 1/2″ square of Very Vanilla card stock with dimensionals.
  • Cut another panel of Gilded Autumn Specialty DSP 4 x 5 1/4 and adhere to the card base of Thick Very Vanilla 4 1/4 x 11 scored at 5 1/2 – and your card front is complete!
  • For the inside…
Beautiful Autumn Bundle again – #2

I wanted to use stamps from this Beautiful Autumn stamp set to bring in the colors of the card front – and they were stamped on a panel of Very Vanilla card stock 4 x 5 1/4. Inks…I used Soft Suede ink for the outline of the oak leaf, full strength. I used Crumb Cake ink for the filler of this leaf; Cajun Craze ink for the maple leaf, stamped off twice for the filler; and Mint Macaron ink for the larger leaf. In the lower right corner, I stamped very softly, stamping off until there was only a bit of ink on the stamp. The sentiment used is from Beautiful Autumn stamp set as well – stamped in full strength Soft Suede ink. This panel was adhered with liquid glue directly to the card case – and voila!

For the envelope…

Beautiful Autumn Bundle again – #3

Adhere the same DSP as the large panel on the card front from the Gilded Autumn Specialty DSP to a Very Vanilla envelope. Adhere a punched acorn with liquid glue – and yep – use that cute acorn punch from the Autumn Punch Pack!

Wow – was that easy or what – and another stunning card. This will be one of those hand delivered cards. The product list is below… Please use my October host code when ordering: HXXMKN2X to receive a free SU! item valued at $10 when your purchase is between $50-$150. If your order exceeds that ๐Ÿ˜, you will still receive a gift from me PLUS any rewards offered by Stampin’ Up!

Have you made your Designer Series Paper purchase yet? It’s still on sale through the end of October. With the 15% of select papers, this is a bargain. You can see those papers below.

Thanks for stopping by

May you have a beautiful day.

Make someone happy by sending them a handmade card filled with love.

Stampin’ Up! Beautiful Autumn Bundle

Goode morning! It’s early here and still very dark. I really like this time of day – a new day opening with all kinds of opportunities. My first … is to give thanks for this day and all that I have been given; I am so richly blessed. In that spirit, I share with you this monochromatic elegant card.

Beautiful Autumn Bundle – #1

I’ve shared just a corner of the card cuz I kinda like the ‘artsiness’ of it :O)Here are the details…

  • Begin with a card base of Thick Very Vanilla 4 1/4 x 11, scored at 5 1/2
  • Punch the fall ‘elements’ with the Autumn Punch Pack and Gilded Autumn Specialty DSP. I used the same paper as in yesterdays post – with the golds and coppers. I punched two gold leaves and one copper acorn.
  • Mount these with dimensional on a Very Vanilla square die cut with the smallest Rectangle Stitched Dies.
  • Mount this with liquid glue onto a panel of the Brushed Metallic card stock die cut with the Layering Squares Dies using the scallop edge. I die cut two of the gold and one of the copper to match the punched elements. Put dimensionals only on the top & bottom of these squares and and set aside.
  • Cut a panel of Very Vanilla cs 4 x 5 1/4 and wrap with ribbon, securing in back with Seal Plus. The ribbons I used were the copper from Basketweave & Metallic Ribbon Combo Pack and the two lengths of 1/16″ Gold Cord from the Wonder of the Season Ribbon Combo Pack. Secure the copper ribbon with glue dots where they will be covered by the squares.
  • Adhere the squares, adhering the center squarer first then the other two. This gets them centered and equally spaced :O)
Beautiful Autumn Bundle – #2
  • Stamp the sentiment using the Beautiful Autumn stamp set in Soft Suede ink on a strip of Very Vanilla cs 1/2 x 4 and trim ends.
  • adhere the sentiment with dimensionals and place appropriately; your card front is complete!

The inside…

Beautiful Autumn Bundle, inside – #3
  • I had a 1/2 x 4 strip of the Gilded Autumn Specialty DSP handy and adhered it to a panel of Very Vanilla cs 4 x 5 1/4. I also had an extra little punched acorn and adhered it with liquid glue as well – and called it done.
  • Adhere to the card inside with liquid glue.

The envelope…

Beautiful Autumn Bundle – #4
  • Cover the envelope flap with a strip of the Gilded autumn Specialty DSP using liquid glue and trim to fit. My strip was 2 1/4 x 6.
  • Punch another leaf using the Autumn Punch Pack and adhere with liquid glue to a 1″ circle of Soft Suede cs. Adhere to the card front with liquid glue and done, done, done.

Beautiful, right? I really, really like this. Products for this card are listed below. Please use my October host code when ordering: HXXMKN2X to receive a free SU! item valued at $10 when your purchase is between $50-$150. If your order exceeds that ๐Ÿ˜, you will still receive a gift from me PLUS any rewards offered by Stampin Up!

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card filled with love.

SU! Beautiful Autumn Bundle

It’s Friday already – where did this week go? How was it – did you have a good week? We had lots of meetings this week, mostly virtual – and that’s OK. Being able to accomplish the goals is what matters. Ok – idle chatter… let’s get on with it shall we?

Today’s card is another fall one – a masculine birthday card. And it’s the DSP that really takes center stage, although… the Autumn Punch pack from the Beautiful Autumn bundle shows itself pretty well too. This is a CASE of a card I saw by another demo: Dawn Olchefske. Thanks for the inspiration!

Beautiful Autumn Bundle
#1

Let’s take a peek at how we made this card.

  • cut a rectangle with Stitched Rectangle Dies fromย  a 2 x 4 piece of Pumpkin Pie cs. SAVE the outside trim!
  • Using the wonderful Autumn Punch Pack, punch the leaves and acorn. And quick tip… align the right side of the punch with the paper and punch, then move to the left side and align the left sign and punch, then punch the center. And if it helps even more, lightly draw a center line that can be erased after punching.
  • Slip a DSP scrap behind it and adhere with liquid glue. There are so many possibilities in this Gilded Autumn Specialty DSP pack, but I definitely wanted masculine and this check fit that perfectly.
  • Mat on a layer of Early Espresso cs with dimensionals. But wait – some texture… I played around with several things, paper, various ribbons, even other DSP, but settled on this from the Forever Greenery Trim Combo Pack. Layer and adhere with Stampin Seal then place on the Early Espresso cs.
  • Adhere another panel of Gilded Autumn DSP to the Early Espresso card base with liquid glue. (What I would do differently here… adhere DSP to Very Vanilla OR Pumpkin Pie layer, then to the card stock base.)
  • Stamp the birthday sentiment from the Best Year stamp set with Pumpkin Pie ink on Very Vanilla cs. Die cut using the Ornate Frames Dies.
  • Adhere both the sentiment panel and the Autumn Punch panel to the card using liquid glue.
  • For a bit of ‘glam’ and added texture – add the Artistry Blooms Adhesive-Backed Sequins to the sentiment panel.

For the inside… and I really like how this turned out!

Beautiful Autumn Bundle – inside
#2

  • Adhere the saved ‘trim’ from the Stitched Rectangle onto a panel of Very Vanilla cs, using liquid glue.
  • Stamp the sentiment from the Banner Year stamp set in Early Espresso ink.
  • Adhere the punched out leaves/ acorn (from the card front) with liquid glue.
  • Adhere the Very Vanilla panel to the card base – and voila – the card is complete.

For the envelope..

Beautiful Autumn
Bundle
#3

Beautiful Autumn Bundle
#4

Thanks for stopping by.
May you have a beautiful day.
Make someone happy by sending them a handmade card filled with love.
Card cuts:
  • Early Espresso 4 1/4 x 11 scored at 5 1/2, 1 7/8 x 4
  • Gilded Autumn Specialty DSP 4 1/8 x 5 3/8, 2 1/4 x is 6, scrap
  • Pumpkin Pie 2 x 4
  • Very Vanilla 4 x 5 1/4, scrap 2 1/2 x 1 1/2

Blog at WordPress.com.

Up ↑