Stampin’ Up! Heartwarming Hugs Fun Fold

Hi there! I’ve been mailing catalogs to my customers and including a card with instructions as part of the package. All of a sudden I realized I needed two more… so got busy and created these. I blogged about this fun fold some time ago and you can find that post here.

Heartwarming Hugs Easel card – #1

The directions and card stock cuts are the same, I just used different DSP and I like this too! I’ll list the card stock cuts again for your convenience. 🙂

Products used:

  • Wrapped in Christmas stamp set (circular stamp)
  • Freezin’ Fun stamp set (banner for easel)
  • 1 1/2″ Circle Punch
  • Starburst Punch or 2″ Circle punch
  • Classic Label Punch
  • Heartwarming Hugs DSP
  • Red Foil Sheets
  • Mossy Meadow card stock
  • Whisper White card stock
  • Real Red ink

Card stock cuts:

  • Card base: 8 1/2 x 5 1/2, scored at 4 1/4. Make cuts in card front panel to the score line at 1 1/2″ & 4″
  • DSP side strips: ~ (2) 1 3/8 x 4 1/8
  • DSP center panels ~ (2) 2 3/8 x 2
  • Whisper White card stock ~ 3 x 4 1/8 + scraps for circular stamp and banner sentiment
  • Red Foil Sheets – punch 2″ circle

Directions:

  • Prepare card base as described in cardstock cuts
  • Adhere DSP strips to side panels of card front with liquid glue
  • Adhere Whisper White panel to inside card with liquid glue
  • Adhere side panels to card back with liquid glue, overlapping the Whisper White panel
  • Fold the center (loose) panel in half and burnish well
  • Adhere the remaining 2 DSP panels to top & bottom sections just folded in half
  • Stamp banner sentiment (for the easel) in Real Red ink using the Freezin’ Fun stamp set. Punch with the Classic Label Punch. Adhere to a strip of Mossy Meadow 5/8 x 2 ¼. Put dimensionals on back and adhere to the Whisper White panel of the card about ¾” from bottom
  • Stamp circle sentiment using the Wrapped in Christmas stamp set in Real Red ink on Whisper White card stock and punch with 1 ½” circle punch
  • Punch a 2” circle from Red Foil Sheets paper.
  • Adhere stamped circle to this glimmer paper. HINT: suggest using Stampin’ Seal to adhere stamped piece to the foil – no slippage! Put dimensionals on the LOWER HALF of this circle and adhere just at the fold

Your card is complete ~ enjoy!

Heartwarming Hugs Easel card – #2

So I’m curious which card you prefer ~ the DSP combination on the left, or the one on the right? Truly, I can’t decide!

Products used for today’s project may be found below. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SAZV3JTK– good until Jan 3. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade card filled with love.

WooHoo! Stampin’ Up! has gone over the top… check out the Giant Year-end sale here

Sale Dates:  December 8, 2020 through January 4, 2021

  • No minimum purchase required.
  • Retiring items are available while supplies last.
  • Exclusions apply: Carryover items will not be discounted.
  • Due to increased shipping times and possible shipping delays during the month of December, we can’t guarantee delivery before Christmas.
  • Ordering Deadlines:  January 4, 2021 at 11:50 PM (MT)

Shop early!  The items that are retiring are only while supplies last!!

Stampin’ Up! Money or gift card holder

It’s that time of year, isn’t it – for giving gifts of appreciation and thanks. Today’s post shares gift holders I made to hold cash or a check or a gift certificate. If you wanted to use a gift card, it will certainly fit.

Money holder

Aren’t these pretty? Details? Here ya go!

  • Card base… 7 1/4 wide x 7 in height
    • score ON SHORT SIDE @ 1 5/8 & 4 5/8
    • mark the bottom center ON THE LONG SIDE and punch with 3/4″ punch
    • burnish score line
    • adhere tear n tape to the bottom section on the inside to create a pocket
  • Cut and add DSP:
    • 7 x 2 1/4; 7 x 1 3/8 and 7 x 2 3/4 for the back (not shown completed above)
    • the lower panel needs a punch as well – I suggest after adhering, simply use the same punch in the same spot
    • all panels were adhered with liquid glue
  • remove tear n tape covering and adhere the lower section to the middle and voila!
Money holder – #3

All you need to do now is a belly band…

  • card stock 1 x about 6- 61/4
    • beginning at the back of the envelope, wrap the strip around to the front so the lower portion of the strip is under the upper portion of the strip. I tried to make the upper strip meet at the edge of tghe upper strip.
    • Adhere the two ends together with liquid glue. Once good and dry, remove the band, burnish the folds and decorate.

Each sentiment panel width and length varied depending on the sentiment used. I embellished with a punched image or a die cut image then adhered that to the strip and the strip adhered to the band, covering the area where the two ends meet. Make sense?

Starting with the top pocket hold, here are the various products used:

  • Pretty Peacock card stock for the base, covered with Brightly Gleaming Specialty DSP. The sentiment panel is Very Vanilla card stock using the Christmas Gleaming stamp set for the sentiment and the ornament. The ornament was punched with the Gleaming Ornaments Punch Pack. Pretty Peacock ink. The banner was trimmed on the end with the Banners Pick a Punch.
  • #2 pocket holder begins with Pacific Point card stock covered with the Snowflake Splendor DSP. The sentiment panel is Whisper White card stock stamped with the Snowflake Wishes stamp set in Pacific Point ink. The snowflake was first stamped with a snowflake in Pacific Point ink on Whisper White card stock from the same stamp set then die cut with the So Many Snowflake Dies.
  • #3 pocket holder begins with Highland Heather card stock covered with another piece of this fabulous Snowflake Splendor DSP. The sentiment panel is Whisper White card stock stamped with a sentiment from Christmas Gleaming stamp set in Pacific Point ink. The snowflake is Balmy Blue Glimmer Paper die cut with So Many Snowflake Dies.

And there you have it – a great project that doesn’t take a huge chunk of time and is beautiful to give and receive! Products used for today’s project may be found below. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SAZV3JTK– good until Jan 3. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade gift filled with love.

WooHoo! Stampin’ Up! has gone over the top… check out the Giant Year-end sale here

Sale Dates:  December 8, 2020 through January 4, 2021

  • No minimum purchase required.
  • Retiring items are available while supplies last.
  • Exclusions apply: Carryover items will not be discounted.
  • Due to increased shipping times and possible shipping delays during the month of December, we can’t guarantee delivery before Christmas.
  • Ordering Deadlines:  January 4, 2021 at 11:50 PM (MT)

Shop early!  The items that are retiring are only while supplies last!!

Stampin’ Up! Darling Donkey Birthday Fun Fold

Hello again… Today’s card is full of fun – a birthday card using the Darling Donkey stamp set that will be available Jan 5, 2021 as a FREE ITEM when you purchase $50 in product – it’s Sale-a-bration time Jan 5 – end of Feb 2021. Woohoo! :O)

Darling Donkey stamp set available Jan 5, 2021 – Sale-a bration item

This little donkey is just too cute – love the impish smile… that square needs a back to it though so I may take that off, add a backing and put it on again. But let’s talk through how I did this. It’s a z-fold, so scored in the center and the front panel folded back on itself exactly in half, then the square added. Here’s what you need to create this card…

Darling Donkey Birthday Fun Fold – #1
  • Smokey Slate card base
  • In Good Taste DSP
  • Whisper White card stock
  • Stitched Shapes (largest square)
  • Classic Label Punch (fence)
  • Balloon Punch (balloon)
  • Tuxedo Black Memento ink
  • Blends: Flirty Flamingo (ears), Crumb Cake/ Gray Granite (donkeys), Color Lifter
  • Black Marker (tail for balloon)
  • Wink of Stella (color ther balloon)
Darling Donkey Birthday – #2
Darling Donkey Birthday Fun Fold – #3

Details:

  • Fold card base (Gray Granite) in half and fold the front flap in half back on itself – to create a z-fold
  • Cover the front fold using In Good Taste DSP
  • Stamp the front donkey in Tuxedo Black Memento ink on Whisper White card stock; color with Stampin’ Blends – light & dark Gray Granite. Use the Color Lifter to highlight – between the eyes & near his backside. (Yes – this one is definitely a male donkey!) Die cut with largest Stitched Shapes Dies (largest square). Here’s where I should have cut a scalloped square out of Basic Black card stock for a backing. Adhere to the front panel with liquid glue, centering.

For the inside: there are two panels, the far right and the folded ‘in’ . Often the ‘in fold’ is not covered but for this card, I definitely wanted to do that.

  • Right panel ~ stamp the donkey from Darling Donkey stamp set in Tuxedo Black Memento ink in the center of the Whisper White panel, making certain it will be covered when the card is closed. Color in Stampin’ Blends: light & dark Gray Granite, light Flirty Flamingo for the ears, dark Flirty Flamingo for the hooves – after all this is a girl donkey 🙂 Stamp the sentiment above it from the same stamp set and in Tuxedo Black Memento ink. Adhere to the right panel of the card base with liquid glue, creating the inside of the card. It was at this point I decided the donkey need a fence and punched several ‘fencing’ using the Classic Label Punch and more of the same In Good Taste DSP. I punched various heights and widths then adhered to the panel with liquid glue.
  • Folded in panel ~ stamp the donkey from Darling Donkey stamp set in Tuxedo Black Memento ink on a Whisper White panel, blocking off the flower so it doesn’t get ink. Color in Stampin’ Blends light & dark Crumb Cake, light Flirty Flamingo for the ears. And yes, I used a bit of Color Lifter for highlight. Punch a small balloon using the Balloon Punch from Bright 6×6 DSP – Flirty Flamingo. Adhere with dimensionals and color with Wink of Stella. Add a balloon ‘tail’ from the balloon to the donkeys mouth. Cute right? Adhere this panel to the card and the card is complete. OOPS! I did add some more fencing to this guy.
Darling Donkey Birthday Fun Fold – #4

For the envelope… I used more of the same In Good Taste DSP to the envelope flap & trimmed to fit. For the envelope front I stamped the sentiment and the ‘sparkels’ in Tuxedo Black Memento ink and called it done.

Card Cuts are listed at the end of this post. Products used for today’s project may be found below. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SAZV3JTK– good until Jan 3. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Card Cuts:

  • Smoky Slate 8 1/2 x 5 1/2, scored @ 4 1/2 & 2 1/8: fold in half, then fold back on itself the small panel
  • In Good Taste DSP 2 x 5 1/4 + 2 1/4 x 6 for envelope + scraps for fencing
  • Whisper White 4 x 5 1/4, 2 x 5 1/4

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade card filled with love.

WooHoo! Stampin’ Up! has gone over the top… check out the Giant Year-end sale here

Year End Closeout Sale Details:

Sale Dates:  December 8, 2020 through January 4, 2021

  • No minimum purchase required.
  • Retiring items are available while supplies last.
  • Exclusions apply: Carryover items will not be discounted.
  • Due to increased shipping times and possible shipping delays during the month of December, we can’t guarantee delivery before Christmas.
  • Ordering Deadlines:  January 4, 2021 at 11:50 PM (MT)

Shop early!  The items that are retiring are only while supplies last!!

Stampin’ Up! Oval Occasions Baby Card

Oh Goodness – I AM enjoying the new products being offered in the new Jan-Jun 2021 Mini Catalog! Today’s project features the Oval Occasions Bundle: Oval Occasions stamp set + Double Oval Punch. These can be ordered Jan 5, 2021 ~ unless of course if you join my team 😏, then you can order these products as part of your demonstrator order. Hint, hint.

I have also used the Detailed Hearts Die, which is kinda fun to work with. It’s in the 2020 Annual Catalog. Are you ready to take a peek?

Oval Occasions Bundle – Baby Card – #1

Here’s what I did…

  • Adhere an Adhesive sheet to the back of Blushing Bride card stock. Die cut using the Detailed Hearts Die: peel the backing and adhere to a panel of Whisper White card stock. Yes, remove the hearts. Some will be adhered to this card, others will be saved in a small ziploc bag for later use.
  • I put some of the hearts on dimensionals and covered them in Wink of Stella. This adds a bit of glam 🙂
  • I punched a scalloped oval from Blushing Bride card stock using the Double Oval Punch thewn added a length of Grayb Granite 1/4″ Shimmer Ribbon with Stampin Seal.
  • I then stamped the front sentiment on a Whisper White panel with Gray Granite ink, punched it out using the Double Oval Punch from the Jan-Jun 2021 Mini Catalog (can be ordered Jan 5!) I put dimensionals on the back and adhered it to the scalloped oval punched with the ribbon. This was adhered to the card front with liquid glue
  • This Whisper White panel is ready for dimensionals and to be adhered to the Thick Whisper White card base – and the card front is done…

For the inside…

Oval Occasions stamp set – baby #2

I stamped the bunny/floral image in Gray Granite ink on a Whisper White panel. I colored it using the ‘fun to use’ Watercolor Pencils and Blending Pen: Flirty Flamingo for the bunnies (lightly), Granny Apple Green for the leaves then shaded with Garden Green, Daffodil Delight for the flowers and shaded with Pumpkin Pie – each blended with the Blending Pen. This really smooths the pencil lines and blends the shading nicely. I added Wink of Stella to the bunnies. I then stamped the sentiment in Gray Granite ink. The heart was added from one of the leftover hearts from the Detailed Hearts Die. I simply peeled the adhesive backing and put it right on the card. Adhere this Whisper White panel to a piece of Blushing Bride with liquid glue then add to the inside of the card, again with liquid glue. Voila – the card is finis!

For the envelope…

Oval Occasions Bundle Baby Card – #3

I stamped the heart stamp from the Oval Occasions stamp set in Flirty Flamingo and this set is ready to be sent to a friend who just had a bay girl. LOVE that I can create and send right away.

Card Cuts are listed at the end of this post. Products used for today’s project may be found below. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SVFB9YJY – good until Dec 10, 2020. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade card filled with love.

Card cuts for today’s project:

  • Thick Whisper White 4 1/4 x 11 scored at 5 1/2
  • Whisper White (2) 3 3/4 x 5 + enough for oval punch
  • Blushing Bride (2) 3 7/8 x 5 1/8 + enough for oval punch

WooHoo! Stampin’ Up! has gone over the top… check out the Giant Year-end sale here

Sale Dates:  December 8, 2020 through January 4, 2021

  • No minimum purchase required.
  • Retiring items are available while supplies last.
  • Exclusions apply: Carryover items will not be discounted.
  • Due to increased shipping times and possible shipping delays during the month of December, we can’t guarantee delivery before Christmas.
  • Ordering Deadlines:  January 4, 2021 at 11:50 PM (MT)

Shop early!  The items that are retiring are only while supplies last!!

Stampin’ Up! Sweet Ice Cream Birthday Card

Today’s card is bright and cheery (not that others haven’t been) and for our granddaughter who is turning 11 this next week. I kept trying to decide what kind of card to make when a Stampin’ Up! pre-order box arrived. This granddaughter loves ice cream with lots of sprinkles and very different flavors… therefore when you see the colors of the ice cream on the card, hopefully you’ll understand.

Sweet Ice Cream Birthday – #1

Isn’t this card full of fun colors? Here’s list of the products used…

  • * Sweet Ice Cream stamp set with coordinating Ice Cream Cone Builder Punch
  • * Ice Cream Corner DSP
  • Stitched Rectangle Dies
  • Artistry Blooms Adhesive-Backed Sequins
  • * Blending Brushes
  • Wink of Stella
  • Pool Part card stock (card base)
  • Whisper White card stock (inside)
  • Inks: Old Olive, Terracotta Tile, Blackberry Bliss, Pool Party and Tuxedo Black Memento

NOTE: those items with an * are new in the Jan – Jun 2021 Catalog and will be available Jan 5, 2021

How to create this card…

  • Cut card base – for this card I used pool Party card stock.
  • Die cut with the largest die in the Rectangle Stitched Dies, a panel using one of the papers in the Ice Cream Corner DSP pack. Adhere to the card base with dimensionals.
  • Using various papers of the Ice Cream Corner DSP, punch the four layers for the ice cream cone. Stamp with the sprinkles stamp using Old Olive ink, Terracotta Tile ink and Blackberry Bliss ink. Put these four pieces together with liquid glue from the bottom – up. Cover lightly with Wink of Stella.
  • Die cut a Whisper White panel using the Stitched Rectangle Dies. Color with Pool Party ink and the new Blending Brushes.
  • Stamp the word ‘Happy’ in Blackberry Bliss on the Whisper White panel. NOTE: know the placement of the ice cream cone prior to stamping!
  • Adhere the ice cream cone to the Whisper White panel with dimensionals.
  • Adhere several Artistry Blooms Adhesive-Backed Sequins. These bring out the colors of the ice cream cone!
  • Adhere this panel to the card front – and the front is complete

For the inside… and the envelope…

Stamp the word ‘Birthday” in PoolParty ink on one of the ‘color blobs’ on the Ice Cream Corner DSP; fussy cut the word; adhere with dimensionals to a Whisper White panel. Stamp the rest of the sentiment in Tuxedo Black Memento ink from the Sweet Ice Cream stamp set.. Adhere several of the Artistry Blooms Adhesive-Backed Sequins. Secure the panel to the card base with liquid glue.

For the envelope, adhere a panel of the Ice Cream Corner DSP to a Whisper White envelope and call it done!

Here are photos of the stamp set and the punch…

Card Cuts:

  • Pool Party card stock 4 1/4 x 11 scored at 5 1/2
  • Whisper White 4 x 5 1/4
  • Various Ice Cream Corner DSP: stitched rectangle 3 3/4 x 5 1/8 + small amounts from other papers in the pack to fit the punch

As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SVFB9YJY – good until Dec 10, 2020. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a card made with love.

Stampin’ Up! Whisper White Going Away…

Straight from headquarters…

Stampin Up! announced this information about Whisper White paper products:

Whisper White has been a Stampin’ Up! staple for so long. We love it and we know you love it, too. We are sad to announce that the suppliers mill producing our Whisper White cardstock has permanently closed due to impacts from the COVID-19 pandemic. Unfortunately, we weren’t given much notice on this closure. This means that the technology unique to this particular supplier is now unavailable to us and we can no longer offer our Whisper White cardstock and related products, such as Whisper White Note Cards & Envelopes. Please note that this won’t affect any of our other cardstocks, this only affects Whisper White.

We know Whisper White has a huge fan base; we’re big fans, too! And we are crushed that it’s going away. Even though this decision was out of our hands, rest assured that we jumped right into action to find the best replacement paper possible. We have dedicated many hours to source and test alternative cardstock options from several suppliers to find the perfect fit that still maintains the Stampin’ Up! quality you know and trust. We are happy to share that we have found a winner for our new cardstock, Basic White!

The quality of our new Basic White was thoroughly tested by our quality assurance and product teams. It also tested very well with demonstrators and concept artists who gave it a huge thumbs up. We believe in the quality of the new Basic White cardstock and we know it will become your new crafting staple!

What does this mean for you?

With Whisper White going out of production, this means a number of Whisper White products will be affected. Below is a list of all products that will be replaced with our new Basic White cardstock. These items are now available while supplies last with an order limit of 2 per item per order.

  • Whisper White 12 x 12 (30.5 x 30.5 cm) Cardstock (124302)
  • Assorted Memories & More Cards & Envelopes (149710)
  • Whisper White Note Cards & Envelopes (131527)  SOLD OUT
  • Whisper White 3 x 3 (7.6 x 7.6 cm) Envelopes (145829)
  • Whisper White 8-1/2 x 11 Cardstock (100730)
  • Whisper White 8-1/2 x 11 Thick Cardstock (140272) – SOLD OUT
  • Whisper White Medium Envelopes (107301)

Stop by the online store to get the following Whisper White products that you love before they’re gone forever!

The Thick Whisper White card stock and Note Cards & Envelopes are already sold out!  So….get some quick if you need it!

As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use my NEW HOST CODE: SAZV3JTK when ordering. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Get your Whisper White now!

Stampin’ Up Wrapped in Christmas Easel Card

So sorry for the late post – hubby and I bought a fresh cut tree yesterday and it was extra heavy- it took both of us to carry it in and get it set up. Then lights, etc…. No, not done yet; hubby is still working on the lights. I’ll share a picture Monday as we won’t get it done until late Sunday afternoon. 🌲🎄🤶🏻

Such fun making this card… an easel card – which I haven’t made in some time. One of my teammates sent an easel card and I was inspired to create several.

Wrapped in Christmas with Snowflake Splendor Easel card – #1

I love the bling from the Balmy Blue Glimmer Paper. Hear are details on how to do this…

  • Cardstock base is 8 1/2 x 11, scored at 4 1/4 (this happens to be Misty Moonlight, but I also used Pacific Point card stock which coordinates with the DSP. When I used Pacific Point card stock, I also used Pacific Point ink.
  • Use your paper trimmer to make two cuts JUST TO THE SCORE LINE on the card front: 1 1/2 & 4
  • Fold the center portion in half and burnish well with your bone folder. This becomes the stand up on the card.
  • Cut 2 strips of Snowflake Splendor DSP and adhere with liquid glue to the side panels
  • Cut 2 additional panels of coordinating Snowflake Splendor DSP and adhere with liquid glue to the center folded panel, one piece above the fold, the other below it. NOTE: I think it looks best if these pieces are cut so the pattern on the DSP matches top to bottom panels
  • Cut a panel of Whisper White and adhere to the INSIDE of the card, centering
  • Adhere side panels to card base with liquid glue.
  • Stamp the sentiment from Freezin’ Fun stamp set in Misty Moonlight ink on Whisper White. Punch out with the Classic Label Punch. Adhere to a strip of Misty Moonlight with liquid glue. Put dimensionals on back and adhere to the Whisper White panel, about 3/4″ from bottom. This creates the easel :O) and allows the upper panel to stand up.
  • Punch a starburst with the Starburst Punch (OOPS! retired item 😞)and Balmy Blue Glimmer Paper
  • Stamp the sentiment from Wrapped in Christmas in Misty Moonlight ink and punch with the 1 1/2″ circle punch. Adhere to the Glimmer paper. NOTE: by scrapping some of the ‘glimmer’ away the paper will adhere more readily. Add liquid glue to that area and bingo, the sentiment adheres.
  • Put dimensionals ON THE LOWER HALF of the Glimmer Paper and attach to the lower center panel near the fold line. Because the lower sentiment is on dimensionals, this allows the upper portion of the card to ‘stand’.
Wrapped in Christmas with Snowflake Splendor Easel Card – #2

I have made several of these, which I don’t usually do, but they were fun and easy and look pretty neat. Notice how the color variations in the DSP make the cards look so different. Hope you enjoyed this design. Card cuts will be listed at the end of this post. Let me know if you have questions.

Card cuts:

  • Card base: 8 1/2 x 11, scored at 4 1/4: top of the card cut to score line at 1 1/2″ and 4″
  • DSP strips for side panels- 1 3/8 x 4 1/8 (cut 2)
  • DSP panels for folded area – 2 3/8 x 2 (cut 2)
  • Whisper White – 3 x 4 1/4 + banner sentiment + circle sentiment
  • Misty Moonlight / Pacific Point for sentiment banner 2 1/4 x 5/8
  • Glimmer paper – use circle dies for 1 3/4 or slightly larger frame for circle sentiment

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade card filled with love.

Stampin’ Up! Whisper White Going Away…

Straight from headquarters…

Stampin Up! announced this information about Whisper White paper products:

Whisper White has been a Stampin’ Up! staple for so long. We love it and we know you love it, too. We are sad to announce that the suppliers mill producing our Whisper White cardstock has permanently closed due to impacts from the COVID-19 pandemic. Unfortunately, we weren’t given much notice on this closure. This means that the technology unique to this particular supplier is now unavailable to us and we can no longer offer our Whisper White cardstock and related products, such as Whisper White Note Cards & Envelopes. Please note that this won’t affect any of our other cardstocks, this only affects Whisper White.

We know Whisper White has a huge fan base; we’re big fans, too! And we are crushed that it’s going away. Even though this decision was out of our hands, rest assured that we jumped right into action to find the best replacement paper possible. We have dedicated many hours to source and test alternative cardstock options from several suppliers to find the perfect fit that still maintains the Stampin’ Up! quality you know and trust. We are happy to share that we have found a winner for our new cardstock, Basic White!

The quality of our new Basic White was thoroughly tested by our quality assurance and product teams. It also tested very well with demonstrators and concept artists who gave it a huge thumbs up. We believe in the quality of the new Basic White cardstock and we know it will become your new crafting staple!

What does this mean for you?

With Whisper White going out of production, this means a number of Whisper White products will be affected. Below is a list of all products that will be replaced with our new Basic White cardstock. These items are now available while supplies last with an order limit of 2 per item per order.

  • Whisper White 12 x 12 (30.5 x 30.5 cm) Cardstock (124302)
  • Assorted Memories & More Cards & Envelopes (149710)
  • Whisper White Note Cards & Envelopes (131527)  SOLD OUT
  • Whisper White 3 x 3 (7.6 x 7.6 cm) Envelopes (145829)
  • Whisper White 8-1/2 x 11 Cardstock (100730)
  • Whisper White 8-1/2 x 11 Thick Cardstock (140272) – SOLD OUT
  • Whisper White Medium Envelopes (107301)

Stop by the online store to get the following Whisper White products that you love before they’re gone forever!

The Thick Whisper White card stock and Note Cards & Envelopes are already sold out!  So….get some quick if you need it!

As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use my NEW HOST CODE: SAZV3JTK when ordering. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Get your Whisper White now!

Stampin’ Up! Corner Bouquet Sympathy

Today’s card is made with Sale-a-bration products, which begins Jan 5, 2021. And that, my friends is not far off. Yep, hard to believe, it is right around the corner.

Corner Bouquet Sympathy #1

Isn’t it pretty? I don’t use Blackberry Bliss card stock very often but with this Oh So Ombre 6×6 DSP, it really is quite nice. The stamps are from the Corner Bouquet stamp set, and is FREE with a $50 purchase during Sale-a-bration. The Oh So Ombre 6×6 DSP is also FREE with a $50 purchase during Sale-a-bration.

Stampin’ Up! has changed (for the better BTW) the length of Sale-a-bration to two months twice a year, the first beginning Jan-Feb of 2021. It coincides with the release of the Jan – Jun Mini Catalog Jan 5. I’m sharing three of those free products today to get you excited about the new catalog. Let’s get to the card.

Corner Bouquet Sympathy #1
  • Cut a panel of Oh So Ombre 6×6 DSP; using the Stamparatus, stamp one corner with this smaller corner stamp in Tuxedo Black Memento ink. Why use the Stamparatus? Couple of reasons… 1) if the stamp is not clear enough after the first stamping, it is easy to re-ink and stamp again in exactly the same spot. It is next to imposssible to do that by eye: it gets a bit of a shadow and that paper couldn’t be used. 2) The Stamparatus allows for perfect placement.
  • Turn the paper 180 degrees to stamp in the opposite corner. Stamp with Tuxedo Black Memento ink.
  • Place the sentiment from the Heal your Heart stamp set (FREE with a $50 purchase during Sale=a=bration) in the center of the paper and stamp with Tuxedo Black Memento ink.
  • Using the largest die in the Stitched So Sweetly Dies, cut the center.
  • Adhere the larger panel to a piece of Basic Black card stock.
  • Adhere the die cut piece with dimensionals, being certain to line up the stamping just right. NOTE: the die cut piece is placed so the gradation of color is the opposite of the larger panel. I was able to do this because of the perfect placement of the corner stamp and use of the Stamparatus.
  • Add Pearl Basic Jewels.
  • Adhere this panel to a Blackberry Bliss card base with dimensionals ~ and your card front is done.

For the inside I stamped the corner with the same stamp from the Corner Bouquet stamp set in Tuxedo Black Memento ink on a panel of Whisper White card stock. Adhere with liquid glue to a piece of Basic Black card stock; then adhere this to the inside of the card & voila!

For the envelope I adhered another piece of the Oh So Ombre 6×6 DSP to the envelope flap. I stamped the small leaf on this and again on the front of the envelope – all in Tuxedo Black Memento ink ~ and the card is ready to send.

This card will go out today to a neighbor who just lost her father. I don’t know the circumstance other than he had health issues for some time. But the circumstances of his death aren’t needed. The focus is the loss of a loved one and to be supportive and caring.

Today’s card is not my design… it was from my upline, Mary Deatherage, who participated in a team training recently. She used different colors and embellishments, but the layout and design are hers. Thank you, Mary, for the inspiration!

Here are photos of the stamp sets and the DSP used in today’s project.

Products not part of Sale-a-bration are listed below. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SVFB9YJY – good until Dec 10, 2020. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

Card cuts for today’s project are listed at the end of this post.

Card cuts:

  • Blackberry Bliss 4 1/4 x 11, scored at 5 1/2
  • Basic Black (2) 4 x 5 1/4
  • Oh So Ombre 6×6 DSP 3 7/8 x 5 1/8
  • Whisper White 3 7/8 x 5 1/8

Thanks for stopping by.

May you have a beautiful day.

Make someone happy sending them a handmade card filled with love.

Stampin’ Up! Year-end Sale & Clearance Rack Update

WooHoo! Stampin’ Up! has gone over the top… check out the Giant Year-end sale here

Also… they updated their Clearance Rack and it went liv e today as well. Click here

Enjoy shopping…

Current HOST CODE: SVFB9YJY until Dec 10. As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁