Search

Terry Lynn Bright, Stampin' Up! Demonstrator

Creative Inspiration

Tag

Playful Alphabet Dies

Stampin’ Up! New Year’s Card

Wow! Can you believe this is a New Year’s card? It’s not even Thanksgiving yet… but it was asked for, so there it is… Let’s get to it.

New Year Card – #1

This card uses lots of ‘schtuff’ to make it… Foam Adhesive Sheets, Adhesive Sheets, Red Foil Sheets, and more! It starts with the base being a Wonder of The Season Memories & More Cards & Envelopes pack. To that I adhered with Stampin Seal a panel of Red Foil Sheet cut 4 x 3. More steps:

  • Cut one of the cards apart, using the inside of the card to cut panels 2 x 3. It will make at least four panels. I did this as sometimes the whites don’t exactly match and of course it will if it’s cut from the same source!
  • Using the Playful Alphabet Dies, die cut the word Happy from Black Glitter Paper that has been backed with Foam Adhesive Sheet. Mine was 1″ x 3 1/4″.
  • Die cut the fun banner using Happy Dies and Artistry Blooms DSP that has Adhesive Sheet adhered to it. (This is a different adhesive than the Foam Adhesive Sheet ~ this will lay flat on the paper and not be raised.)
  • Die cut the balloon tail from the same Artistry Blooms DSP with Adhesive Sheet adhered to it ~ again using Happy Dies.
  • Die cut the ballon using the same Happy Dies ~ this time using Oh So Ombre 6×6 DSP (new in the Sale-A-Bration catalog). This also has Foam Adhesive Sheet added to it.
  • Die cut the super – uber cute bow from Green Foil Sheet and the Happy Dies.
  • Stamp the sentiment in Granny Apple Green ink on a scrap of the Artistry Blooms DSP and cut with the Classic Label Punch. I separated mine, but you wouldn’t have to. The sentiment comes from the A Wish for Everything stamp set.

Now all the little pieces are cut out ~ let put it together…

  • Cut a panel of Red Foil Sheet 4 x 3 and adhere to the card front of the Wonders of The Season Memories & More card.
  • Remove the backing on the Black Glitter Paper die cut letters and adhere across the center of the 2 x 3 card panel previously cut.
  • Remove the backing on the green banner and adhere at the top of the 2 x 3 card panel.
  • Adhere the white card panel to the Red Foil Sheet panel using Stampin’ Seal.
  • Remove the backing on the balloon tail and adhere to the card front.
  • Remove the backing on the balloon and adhere to the ‘tail’. Cover the balloon with Wink of Stella.
  • Add the super- uber cute Green Foil bows with just a dot of liquid glue.
  • Adhere the sentiment ‘New Year’s Day’ with dimensionals ~ and your card front is done!

For the inside…

New Year Card inside – #2
  • Stamp the sentiment in Memento Tuxedo Black ink on one of the 2 x 3 white panels previously cut. The sentiment comes from Best Year stamp set. I used this as it fits the card and I really like how the scrolly words coordinate with the scrolls on the card front. 👍 I added a single Elegant Faceted Gem for more sparkle.
  • Adhere the white panel to Oh So Ombre 6×6 DSP panel cut 4 x 3 ~ then adhere this to the inside of the card. VOILA!

New Year Card – #3

Fun card, right?! Products for this card may be found below. If you have any questions, please feel free to ask, either here on my post or send to my email at TLsBrightSpot@gmail.com.

As a thank you to my customers, when the order is between $50-$150 I offer a SU! item of your choice valued at $10. Remember to use MY CURRENT HOST CODE SVFB9YJY – good until Dec 3, 2020. When the order is over $150, you still receive that free gift from me, but SU! has Stampin’ Rewards that may be used for additional products 😁

REMEMBER… due to some glitches at Stampin’ Up!, they decided the 10% off SALE EXTRAVAGANZA of most items in the 2020-2021 Annual Catalog is going through today Nov 25! Shop til you drop!

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card filled with love.

SU! Playful Alphabet Dies and Z Fold

Hello… last baby card I promise! Made with the Playing with Patterns 6×6 DSP and the Playful Alphabet Dies, this is another fun fold card. Here ’tis…

Playful Alphabet Dies
Playing with Patterns 6×6 DSP
#1

The card base is Purple Posy 4 1/4 x 11 scored at 2 3/4 and 5 1/2. Burnish the 5 1/2 as though the card were going flat, then fold back the 2 3/4 scored panel – this makes a z – therefore… ta da… a Z Fold Card. Cut a panel of Coastal Cabana 2 3/8 x 4. Adhere a panel of the Playing with Patterns 6×6 DSP cut to 2 x 3 7/8. Wrap a length of the Silver/ Misty Moonlight ribbon from the Flowers for Every Season Ribbon Combo Pack three times around and tie in knot. Hold in place on the back with tape. Put dimesnionals on this panel back and set aside.

Adhere Foam Adhesive Sheet strip (about 1 x 2 1/2) to a piece of coordinating DSP then die cut the letters B-O-Y using the Playful Alphabet Dies. Adhere to the card front by simply removing the backing on the Foam Adhesive strip! Now adhere this completed panel to the front of your Z-Fold. Add three 2020-2022 In Color Enamel Dots – these are Just Jade.

For the inside… Coastal Cabana 4 x 5 1/4 then Whisper White 3 3/4 x 5, then add a coordinating strip 1/4″ from right end. Voila! The envelope got the same DSP adhered to the flap. Baby card #5 is done…

#2

Playful Alphabet Dies
Playing with Patterns 6×6 DSP
#3

Here are all five cards – and yes, they have been sent already! What a fun gift set to forward to a new Mom. Hope she really likes them; I had such fun creating them for her.

Playful Alphabet Dies
Playing with Patterns 6×6 DSP
Pattern Play stamp set

Playful Alphabet Dies
Waterfall card

Playing with Patterns 6×6 DSP
Playful Alphabet Dies
Gatefold

Tasteful Labels Dies
Playing with Patterns 6×6 DSP

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card.

SU! Playful Alphabet Dies Fun Fold

Hi Y’all… I’m on a roll here with the baby cards AND the Playful Alphabet Dies AND the Playing with Patterns 6×6 DSP. My goal is five cards with papers all from the same stash but totally different style, fold, etc. So far I think I have been successful. Here is today’s card ~ a Gate Fold

Playing with Patterns 6×6 DSP
Playful Alphabet Dies
Gaten Fold
#1

After looking at it (again and again!), I think it needs another layer behind the banner ~ may have to do that… For the time being, here’s how this card is made…

Calypso Coral cs cut to 4 1/4 x 11 then scored at 2 3/4 and 8 1/4. Add a layer of Coastal Cabana cs to each front panel, 2 5/8 x 4 1/8. (You could easily make this 2 1/2 x 4). Cut two additional panels, this time in Playing with Patterns 6×6 DSP. These two panels were each 2 x 4. Adhere, centering, to the side panels. Cut a label using the Tasteful Labels Dies. (Gosh, I use these so much – they are very versatile). With the Playful Alphabet Dies cut the letters B-O-Y from Whisper White and adhere to the label with liquid glue.Adhere the Coastal Cabana label only on the left front panel. Add five Playing with Patterns Resin Dots and your card front is done.

Gatefold
Playful Alphabet Dies
Playing with Patterns 6×6 DSP
#2

The inside is easy peasy… Coastal Cabana layer 4 x 5 1/4, then Whisper White 3 3/4 x 5. Add a strip of the Playing with Patterns 6×6 DSP that coordinates and bingo, the card is complete!

Gatefold
Playing with Patterns 6×6 DSP
#3

The envelope…  Simply adhere a 2 14 x 6 panel of the Playing with Patterns 6×6 DSP. Voila! Card #3 in this ‘baby bundle’ for our daughter to give as a gift to the new mother. In case you missed the last two posts, here are photos of those…

Playful Alphabet Dies
Playing with Patterns 6×6 DSP
Pattern Play stamp set

Waterfall card

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card.

SU! Waterfall Card with Playful Alphabet Dies

Hi Everyone! Yesterday I told you my task is to create several baby cards for my daughter’s girlfriend.Today’s card is another to add to that gift set and it uses the Playful Alphabet Dies AND the Playing with Patterns 6×6 DSP. I did absolutely no stamping on this project but it is a new fun type card I haven’t made before. It’s called a waterfall card ~ here ’tis…

Playful Alphabet Dies
#1

This is pretty easy and I’ll talk you through it then do a very short video of how it works. The card base is Purple Posey 8 1/2 x 5 1/2, scored at 4 1/4. Cut Misty Moonlight 4 1/8 x 5 3/8 and adhere to the card front. Cut a panel of Playing with Patterns DSP 4 x 5 1/4 and adhere to the Misty Moonlight. Cut a Misty Moonlight strip 1 1/2 x 8 and score at 1 1/2, 2 1/4, 3, and 3 3/4. Burnish.  Cut four (4) 1 1/2 squares out of Bumblebee cs. Cut three (3)  1 3/8 squares out of coordinating Playing with Patterns 6×6 DSP. Cut one (1) 1 3/8 square out of Whisper White. With your Playful Alphabet Dies, die cut the letters B-O-Y out of that Whisper White Square.  This was a tight squeeze but it did work. Adhere this Whisper White to one of the yellow squares. From the die cuts, I chose to adhere the letter B, the middle of the O and left the Y to show through. Adhere this panel to the square on the 1 1/2 x 8 strip, JUST UNDER THE FOLD LINE (not on it!).Place a strip of Tear n Tape to the bottom of this panel on the back side of the Misty moonlight. Adhere the next Bumblebee square with Tear n Tape JUST UNDER THE NEXT SCORE LINE.  Continue adhering the last two squares in this same manner.

The purpose of adhering the squares just under the score line is to allow them to ‘fall’ into place as you pull the strip. Make sense?  Here are individual pictures of the placement.

Waterfall card
#3

Waterfall card #4

 

 

 

 

 

 

 

 

 

 

 

Waterfall card
#5

Take a peek at this video. to watch it unfold.

Cut a strip of Misty Moonlight 1/2 x 4 and a coordinating 3/8 x 4 strip of Playing with Patterns 6×6 DSP. Adhere the DSP to the Misty moonlight. Remember the Tear n Tape at the bottom of the panel with the word B-O-Y? Adhere to the front of this strip, in the center,  and bottom of the strip. Now lay flat on your card but do not yet adhere. Take a peek at this picture… the long blue section is UNDERNEATH the strip while the B-O-Y piece is adhered to the bottom of the cross strip. Get it?

Waterfall card
Playful Alphabet Dies
#2

Once you determine the correct placement of the waterfall/ cross strip, adhere Tear n Tape to the cross strip but not across the waterfall strip. The waterfall needs to slide through the opening smoothly but there should not be too much room for sideways movement. Punch a hole about 1/4″ up from the bottom of the pull strip and insert a length of ribbon  – probably 7″  before folding in half.  This becomes your cute “pull” for the waterfall. I used Daffodil Delight 1/4″ as I forgot I had Bumblebee 1/4″, but it worked!

Now do the inside… super simple… Misty Moonlight 4 x 5 1/4, Whisper White 3 7/8 x 5 3/8. A
dd a strip of coordinating  Playing with Patterns 6×6 DSP and adhere to the inside.

#6

The envelope flap has coordinating Playing with Patterns DSP and that’s it! Voila! Such a FUN CARD to make. I hope you try it…

Waterfall card
#5

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card!

SU! Pattern Play Stamp Set and Playful Alphabet Dies

Hi Everyone! Ever have one of those mornings when you can’t sleep anymore? Yep, this was one of those. A little after 4 AM and my eyes were wide open. What to do? (as if there was any question!) Make a card!!! Yesterday I was talking with our daughter and her neighbor just had a baby boy. I said I would make some cards she could give her friend ~ and here’s the first one.

Pa
Playful Alphabet Dies
Playing with Patterns 6×6 DSP
#1

Foam Adhesive Sheets are the best for doing these letters – it was so easy… just adhere the foam adhesive to the back of your card stock, lay on your die cut piece and run it through your die cutting machine. I ran it through twice cause I wanted to be certain it cut through. And here’s a TIP: only adhere the foam adhesive to your designated area for cutout to avoid waste.

Here’s how to make this card…

  • Playing with Patterns 6×6 DSP ~ stripe is cut 1 1/2 x 5; large dots is cut 2 x 4
  • The Bumblebee is cut 1/8″ larger both in length and width
  • Misty Moonlight is cut 1/8″ larger both in length and width of the Bumblebee
  • The front stamped panel is 2 1/2 x 3 with Bumblebee 1/8″ larger and Misty Moonlight 1/8 larger than the Bumblebee
  • Adhere Foam Adhesive to a strip of DSP; die cut letters appropriately
  • I should have stamped the 2 1/2 x 3 Whisper White panel all over – so do that – THEN adhere the die cut letters. The stamping here was done with Bumblebee and centers colored with Purple Posy marker.
  • Card base is Purple Posy 8 1/2 x 5 1/2, scored at 4 1/4: adhere all panels

The inside was super easy ~ Misty Moonlight 4 x 5 1/4; Whisper White 3 7/8 x 5 1/8. Stamp the Whisper White with Misty Moonlight and adhere to Misty Moonlight then to the inside of the card. Voila! Your card is ready…

Pattern Play stamp set
#2

For the envelope, adhere a panel of the Playing with Patterns 6×6 DSP to the envelope flap, trim. Stamp the front of the envelop with Misty Moonlight and you are all finished.

Playful Alphabet Dies
Playing with Patterns 6×6 DSP
Pattern Play stamp set
#3

I love how all the papers in this DSP stack coordinate so well. SU! does an amazing job with their papers, and this is no exception. I hope you enjoyed today’s card.

Thanks for stopping by.

May you have a beautiful day.

Make someone happy by sending them a handmade card.

 

Blog at WordPress.com.

Up ↑